Echo RM-210SB Manual do Utilizador descarregar pdf (Página 28)

6. Feed ends of line through housing eyelets (G) and place spool (B)

over drive (H). Align pegs (I) on drive with notches in spool, and

push spool into drum.

7. Pull on both lines until they come free from notches (F) in spool.

8. Hold drum (A) firmly and turn spool (B) CCW (counterclockwise)

until it stops. DO NOT push in on spool when turning.

9. Pull both lines out and trim to cut-off knife length.

1 2 ... 23 24 25 26 27 28 29 30 31 32

Sem comentários

Echo RM-210SB Manual do Utilizador Página 28