Echo RM-210SB Manual do Utilizador descarregar pdf (Página 26)

Drive Shaft Upper

1. Loosen clamping knob (A).

2. Pull locator pin (B) and rotate 1/4 turn counter clockwise to lockout

position.

3. Remove attachment.

4. Remove coupler (E) from upper drive shaft assembly by loosening

clamping screw (C) and removing set screw (D).

5. Remove upper flex cable (F), wipe clean, and apply a thin coating of

1/2 oz. (15ml) of grease.

6. Install cable. Make sure that the flex cable fully engages into the

clutch square drive socket.

7. Slide coupler on upper drive shaft until fully seated, and align set

screw hole in coupling with hole in upper drive shaft.

8. Install and tighten set screw (D), and tighten clamping screw (C).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

Modely	Typ Dokumentu
XLNC010	Datový list AF XLNC010 equipment cleansing kit, 1 stránky
FCC010	Datový list AF FCC010 equipment cleansing kit, 1 stránky
XMIF001	Datový list AF XMIF001 equipment cleansing kit, 1 stránky

Echo RM-210SB Manual do Utilizador Página 26