Echo RM-210SB Manual do Utilizador descarregar pdf (Página 25)

GRASS TRIMMER/BRUSH CUTTER

OPERATOR'S MANUAL

LUBRICATION

Level 1.

Tools Required: 13 mm Open End Wrench, Screwdriver, Clean rag,

Grease gun P/N 91016

Parts Required: ECHO

LUBE

8 oz. (P/N 91014) or Lithium Base

Grease.

Drive Shaft (Lower)

IMPORTANT

Lower and upper drive shaft must be lubricated with high tempera-

ture automotive grease every 25 hours of operation, otherwise

drive shaft assembly overheating and failure can result.

1. Loosen two (2) screws (B) and remove center locating screw (C).

Pull gear box and shield from drive shaft housing.

2. Pull flexible cable from the drive shaft housing, wipe clean and

re-coat with a thin coating [15 ml (1/2 oz.)] of ECHO

LUBE

3. Slide the flexible cable back in the drive housing. DO NOT get

dirt on the flex cable.

4. Install the gear housing and shield assembly.

Gear Housing

1. Clean all loose debris from gear box.

2. Remove plug (A) and check level of grease.

3. Add grease if necessary, DO NOT over fill.

IMPORTANT

Flat edge of washers (D) must be against drive shaft.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

Echo RM-210SB Manual do Utilizador Página 25