Echo PPT-265S Manual do Utilizador descarregar pdf (Página 27)

Power Pruner

oPeraTor's Manual

Exhaust Port Cleaning

Level 2.

Parts Required: As needed: Heat Shield

1. Remove spark plug lead from spark plug, and remove mufer

cover (1 screw).

2. Place piston at top dead center. Remove mufer (A) and heat

shield (B).

3. Use a wood or plastic scraping tool to clean deposits from cylinder

exhaust port.

IMPORTANT

Never use a metal tool to scrape carbon from the exhaust port.

Do not scratch the cylinder or piston when cleaning the exhaust

port. Do not allow carbon particles to enter the cylinder.

4. Inspect heat shield, and replace if damaged.

5. Install heat shield and mufer.

6. Tighten mufer mounting bolts (or nuts) to 60-70 in•lbf

(70-80 kgf•cm).

7. Install mufer cover and attach spark plug lead.

8. Start engine, and warm to operating temperature.

9. Stop engine, and re-tighten mounting bolts (or nuts) to specica-

tions.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Sem comentários

Modely	Typ Dokumentu
XLNC010	Datový list AF XLNC010 equipment cleansing kit, 1 stránky
FCC010	Datový list AF FCC010 equipment cleansing kit, 1 stránky
XMIF001	Datový list AF XMIF001 equipment cleansing kit, 1 stránky

Echo PPT-265S Manual do Utilizador Página 27