Echo PPT-265S Manual do Utilizador descarregar pdf (Página 13)

Power Pruner

oPeraTor's Manual

handle shaft / power head

1. Loosen two (2) clamping screws (A) and remove locating screw

(B).

2. Pull exible drive shaft coupler (C) 2-3 in. out of drive shaft as-

sembly.

3. Align exible drive shaft coupler with engine socket and slide

together until locating hole in shaft is visible through locating hole

in engine housing.

4. Install locating screw (B) and tighten clamping bolts (A).

4. Align exible drive shaft coupler with drive shaft socket and slide

together until handle shaft is fully seated into drive shaft.

5. Tighten clamping bolts (A).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Sem comentários

Echo PPT-265S Manual do Utilizador Página 13