Echo EDR-2100 Manual do Utilizador descarregar pdf (Página 14)

Replacement of chuck should be done in the

following manner:

1. Remove bolt with hexagonal hole fixed in

the driving axle.

2. Insert accessory hexagonal bar into chuck

and fix.

3. Fit 19 mm spanner onto driving axle and

keep it fitted.

4. Fit 10 mm box spanner onto the hexagonal

bar and turn it into direction as indicated by

an arrow to remove chuck.

5. Fit a new chuck in the reversed order of

removing.

REPLACEMENT OF CHUCK

ADJUSTING CARBURETTOR

(As Required)

GENERAL INFORMATION

The idle speed adjuster screw controls the

throttle opening at the idle position.

IDLE ADJUSTMENT

Start engine and allow it to run at high idle until

warm.

1. Turn the idle speed screw clockwise until

blade begins to move.

2. Turn idle screw counter-clockwise 1/2 turn

or until the blade stops ( 2,700 to 3,300

r/min).

1 2 ... 9 10 11 12 13 14 15 16

Sem comentários

Echo EDR-2100 Manual do Utilizador Página 14