Echo SRM-230 Manual do Utilizador descarregar pdf (Página 10)

NYLON LINE HEAD INSTALLATION

(Use with Plastic Shield)

1. Be sure upper adaptor plate remains on PTO shaft.

2. Align locking hole in upper plate with notch in edge of gear

housing and insert head locking tool (C).

3. Thread line head onto shaft by turning it counter clockwise until

head is tight against upper plate.

4. Remove head locking tool.

MIN

SPACING

FRONT HANDLE ADJUSTMENT

NOTE

Label shows minimum spacing for front handle location.

1. Position front handle for comfortable operation and secure screws.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sem comentários

Echo SRM-230 Manual do Utilizador Página 10