Echo SRM-210U Manual do Utilizador descarregar pdf (Página 27)

GRASS TRIMMER/BRUSH CUTTER

OPERATOR'S MANUAL

LUBRICATION

Level 1.

Tools required: 8 & 13 mm Open End Wrench, Cross Head

Screwdriver, Clean rag, Grease gun P/N 91016

Parts Required: ECHO

LUBE

8 oz. (P/N 91014) or Lithium Base

Grease.

Gear Housing

1. Clean all loose debris from gear box.

2. Remove plug (A) and check level of grease.

3. Add grease if necessary. DO NOT over fill.

Drive Shaft

1. Loosen two (2) screws (B) and remove center locating screw (C).

Pull gear box and shield from drive shaft.

2. Pull flexible cable from the drive shaft housing, wipe clean and

recoat with a thin coating [1/2 oz. (15 ml)] of grease.

3. Slide the flexible cable back in the drive housing. DO NOT get

dirt on the flex shaft.

4. Install the gear housing and shield assembly.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

Echo SRM-210U Manual do Utilizador Página 27