Echo PPT-265 EN Manual do Utilizador descarregar pdf (Página 23)

POWER PRUNER

OPERATOR'S MANUAL

1. Remove spark plug lead.

2. Remove air cleaner cover.

3. Remove muffler cover screw and muffler cover (A).

4. Remove 2 engine cover screws and engine cover (B).

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder fins.

5. Use brush to remove dirt from the cylinder fins.

6. Remove grass and leaves from the grid between the recoil starter

and fuel tank.

7. Assemble components in reverse order.

EXHAUST SYSTEM

Spark Arrestor Screen

Level 2.

Tools Required: Cross Head Screwdriver, 4mm Hex Wrench, Soft

Metal Brush

Parts Required: Spark Arrestor Screen, Gasket

1. Remove two (2) muffler cover screws and muffler cover (A).

2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt

from entering cylinder.

3. Remove spark arrestor screen (B), gasket (C) and exhaust guide

(D) from muffler body.

4. Clean carbon deposits from muffler components.

NOTE

When cleaning carbon deposit, be careful not to damage the

catalytic element inside muffler.

5. Replace screen if it is cracked, plugged or has holes burned

through.

6. Assemble components in reverse order.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Sem comentários

Echo PPT-265 EN Manual do Utilizador Página 23