Echo PPF-280 Manual do Utilizador descarregar pdf (Página 27)

Power Pruner

oPeraTor's Manual

guIde bar and saw ChaIn replaCemenT

WARNING

Never try to replace or adjust guide bar and saw chain with engine running. Always disconnect spark plug wire

before servicing guide bar and saw chain. This saw chain is VERY sharp, wear heavy gloves to protect your hands

when handling it. Wear eye protection meeting CE or ANSI specication Z87.1.

Guide Bar Replacement / Installation

Level 2

1. Remove guide bar nuts (A), and unscrew sprocket cover screw (B).

2. Remove sprocket cover (D).

3. Remove guide bar and saw chain from gear case and sprocket.

4. Remove chain from guide bar and check guide bar for damage and

excessive or uneven wear. Replace guide bar if necessary.

lubrICaTIon

Drive Shaft

Level 2

Parts Required: Lithium Base Grease.

1. Remove cutting attachment locator screw (A).

2. Loosen bolts (B).

3. Remove cutting attachment assembly.

4. Remove ex cable (C), wipe clean and apply a thin coating (15 ml)

of high temperature grease.

5. Slide the exible cable back in the drive housing. DO NOT get

dirt on the ex cable.

6. Install and secure cutting attachment assembly.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Sem comentários

Echo PPF-280 Manual do Utilizador Página 27