Echo CS-355T Manual do Utilizador descarregar pdf (Página 16)

16 X7503320105

DESCRIPTION CS-355T

5. Mount guide bar on studs (E) and slide toward sprocket (H) to

make saw chain installation easier. Install saw chain around

sprocket and guide bar as shown, with cutters on top of guide

bar facing forward.

6. Install sprocket guard over guide bar studs. Ensure chain

tension adjuster pin (G) fits into the adjuster hole (F), brake

band (K) is positioned around clutch drum. Tighten sprocket

guard nuts finger tight.

7. Turn saw over and check brake band (K) for correct position

around clutch drum (J). If brake band is not in place around

drum, remove sprocket guard and reinstall. Tighten sprocket

guard nuts finger tight.

Improper sprocket guard assembly can result in serious

injury, and will cause severe saw damage if unit is started.

Never start or operate saw if brake band is not in place on

clutch drum. Always check chain brake operation after replacing guard. Do not use saw if chain

brake does not function properly.

8. Adjust saw chain tension, as instructed in “Adjustment, Chain Tension”.

Adjusting Chain Tension

Always loosen sprocket guard nuts before turning the chain tension

adjuster, otherwise the sprocket guard and tensioner will be

damaged.

1. Remove spark plug cover and disconnect spark plug lead.

2. Loosen sprocket guard nuts.

For more information

scan this QR code.

Unlock chain brake

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Sem comentários

Modely	Typ Dokumentu
XLNC010	Datový list AF XLNC010 equipment cleansing kit, 1 stránky
FCC010	Datový list AF FCC010 equipment cleansing kit, 1 stránky
XMIF001	Datový list AF XMIF001 equipment cleansing kit, 1 stránky

Echo CS-355T Manual do Utilizador Página 16