Echo CS-271T Manual do Utilizador Página 19
- Página / 36
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
17
CS-271T
CUTTING INSTRUCTION
GENERAL
CAUTION
• Read the ECHO “CHAIN SAW SAFETY
MANUAL” included with your chain saw for
additional cutting and safety instructions.
• Wear suitable hearing protection such as
earmuffs or earplugs to protect against
objectionable or uncomfortable loud noises.
• Do not let the tip of the bar touch anything
while the engine is running.
At cutting speed the chain is moving at a
high rate of speed.
Should the tip contact a limb or log while
the chain is moving, the tip will be pushed
upward with considerable force.
This is known as kickback. Avoid it!
In all circumstances the operation of the chain saw
is a one-man job.
It is difficult at times to take care for your own
safety, so don’t assume the responsibility for a
helper as well.
After you have learned the basic techniques of
using the saw, your best aid will be your own good
common sense.
The accepted way to hold the saw is to stand to the
left of the saw with your left hand on the front
handlebar and your right hand on the rear handle
so you can operate the throttle trigger with your
right index finger.
Before attempting to fell a tree, cut some small logs
or limbs.
Become thoroughly familiar with the controls and
the responses of the saw.
Start the engine, see that it is running properly.
Squeeze the trigger to open the throttle wide open
and start the cut. If the chain is properly sharpened,
the cutting should be relatively effortless.
It is not necessary to press down hard to make the
saw cut.
Pushing the saw too hard will slow the engine and
cutting will actually be more difficult.
Some material may adversely affect the housings
of your chain saw.
(Example palm Tree Acid, fertilizer etc.)
To avoid housing deterioration, carefully remove all
packed sawdust around clutch and guide bar area
and wash with water. Coat metal parts with light oil.
Kickback
- INSTRUCTION MANUAL 1
- CHAIN SAW 1
- WARNING 2
- RULES FOR SAFE OPERATION 3
- B. Other Safety Precautions 4
- SYMBOLS AND SIGNS 5
- CONTENTS 5
- SYMBOL FORM 6
- PACKING LIST 7
- NOMENCLATURE OF PARTS 8
- NOMENCLATURE OF PARTS 9
- OPERATOR SAFETY 10
- CORRECT USE OF CHAIN BRAKE 11
- PREPARATION FOR USE 12
- ADJUSTING CHAIN TENSION 13
- FUEL AND LUBRICANT 14
- EMISSION DATA 15
- OPERATION 16
- WHEN THE ENGINE IS COLD 17
- WHEN THE ENGINE IS WARM 17
- STOPPING 18
- CHECKING CHAIN TENSION 18
- CHAIN LUBRICATION TEST 18
- CUTTING INSTRUCTION 19
- FELLING THE TREE 20
- DANGER 21
- CHAIN BRAKE OPERATION 22
- TESTING THE BRAKE 22
- AUTOMATIC CHAIN BRAKE 23
- GUIDE BAR 24
- SAW CHAIN 24
- SKILL LEVELS 25
- MAINTENANCE INTERVALS 25
- CARBURETOR ADJUSTMENT 26
- AIR FILTER 27
- CHECK FUEL SYSTM 27
- SPARK PLUG 27
- FUEL FILTER 27
- OIL FILTER 27
- SPROCKET 28
- CYLINDER FINS 28
- MUFFLER SPARK ARRESTOR 28
- AUTOMATIC OILER 28
- SETTING THE SAW CHAIN 29
- TROUBLESHOOTING 31
- STORAGE AFTER USE 32
- TECHNICAL DATA 32
- WARRANTY STATEMENTS 33
Manuais e produtos relacionados com Ferramentas a gasolina Echo CS-271T
(30 páginas)
(17 páginas)AF XMCA125 manuály
Uživatelské manuály a uživatelské příručky pro Sada na čištění zařízení AF XMCA125.
Poskytujeme 1 manuály pdf AF XMCA125 ke stažení zdarma podle typů dokumentů: Datový list
Comentários a estes Manuais