Echo CS-352 Manual do Utilizador descarregar pdf (Página 13)

CS-352

PREPARATION FOR USE

(A)

(D)

(E)

(C)

(B)

(F)

WARNING

Saw chain is sharp! Always wear gloves when

handling assembly, otherwise serious personal

injury may result.

KICK GUARD

TO BAR INSTRUC-

TIONS

1. Install bolt (A) in rear hole (B) of Kick Guard

and

through front hole (C) in guide bar.

2. IMPORTANT: Dimple (D) in Kick Guard

must en-

gage recess (E) in guide bar.

3. Tighten nut (F) and bolt (A) using 11 mm (7/16 in.)

wrenches until snug. Make certain Kick Guard

ush against guide bar.

4. Tighten nut (F) 1/8 additional turn.

5. Check to make certain Kick Guard

is tight on guide

bar.

GUIDE BAR AND SAW CHAIN IN-

STALLATION/REMOVAL

1. Release the cylinder cover latches, and remove the

cylinder cover.

2. Remove spark plug lead.

3. Remove two clutch cover nuts and remove clutch

cover.

4. Remove bar and saw chain if necessary. See “Main-

tenance and Care” section for guide bar/saw chain

maintenance procedures.

Clutch cover

Brake lever

(Front hand guard)

Two nuts

Unlock chain brake

WARNING

Using improper replacement components or remov-

ing safety devices may result in serious or fatal

injury.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comentários a estes Manuais

Sem comentários

Echo CS-352 Manual do Utilizador Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas a gasolina Echo CS-352