Echo HC-150 Manual do Utilizador Página 23
- Página / 24
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
HEDGE CLIPPER
OPERATOR'S MANUAL
23
STORAGE
WARNING DANGER
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area
clear of flammable debris during transportation or when storing, otherwise serious personal injury may result.
Long Term Storage (over 30 days)
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage
maintenance which includes the following:
1. Store unit in a dry, dust free place, out of the reach of children.
WARNING DANGER
Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark, otherwise serious
personal injury may result.
2. Place the stop switch in the “OFF” position.
3. Remove accumulation of grease, oil, dirt and debris
from exterior of unit.
4. Perform all periodic lubrication and services that are
required.
5. Apply clean oil to the entire length of the blade. Be
certain the blade bolts are lubricated.
6. Install blade cover on blades.
7. Tighten all the screws and nuts.
8. Drain the fuel tank completely and pull the recoil
starter handle several times to remove fuel from the
carburetor.
9. Remove the spark plug and pour 7cc (1/4 oz.) of fresh,
clean, two-stroke engine oil into the cylinder through
the spark plug hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2-3 times to distribute
the oil inside the engine.
C. Observe the piston location through the spark
plug hole. Pull the recoil handle slowly until the
piston reaches the top of its travel and leave it
there.
10. Install the spark plug (do not connect ignition cable).
IMPORTANT
Always store and transport hedge clippers in a stable, horizontal position. Support gear case and cutting blades to
prevent excessive flexing, which may cause damage to these components. Always install blade cover when trans-
porting or storing unit.
- Hedge Clipper 1
- TABLE OF CONTENTS 2
- INTRODUCTION 2
- OPERATOR’S MANUAL 2
- SAFETY MANUAL 2
- SYMBOLS 4
- SAFETY I NSTRUCTIONS 4
- OPERATION/EXTREME CONDITIONS 5
- OPERATION 6
- EMISSION C ONTROL 6
- DESCRIPTION 7
- SPECIFICATIONS 9
- ASSEMBLY 10
- BLADE STIFFENER 10
- STIFFENER REMOVAL 10
- HEDGE CLIPPER 11
- OPERATOR'S MANUAL 11
- PRE-OPERATION 11
- OPERATION 12
- COLD ENGINE 12
- WARM ENGINE 13
- TRIMMING 14
- MAINTENANCE 14
- INTERVALS 15
- WARNING DANGER 16
- SYSTEM CLEANING 17
- Cylinder Exhaust Port 18
- Spark Arrestor Screen 18
- ADJUSTMENT 19
- Gear Box Assembly 20
- TROUBLESHOOTING 22
- SERVICING INFORMATION 24
- CONSUMER PRODUCT SUPPORT 24
- REGISTRATION 24
- OR REPLACEMENT MANUALS 24
Manuais e produtos relacionados com Motor Echo HC-150
Motor Echo ED-200 Manual do Utilizador
(16 páginas)
(16 páginas)
Motor Echo QV-670 Manual do Utilizador
(24 páginas)
(24 páginas)
AF XMCA125 manuály
Uživatelské manuály a uživatelské příručky pro Sada na čištění zařízení AF XMCA125.
Poskytujeme 1 manuály pdf AF XMCA125 ke stažení zdarma podle typů dokumentů: Datový list
Comentários a estes Manuais