Echo 8870 Manual do Utilizador descarregar pdf (Página 16)

6. This will bring up a Connect to dialog box. From the pull

down next to “Connect using:”, select the Com port to

which the Protocol Adapter is connected (see

ILLUSTRATION 8). Start with Com port 1 (or the next

lowest available number) if you are unsure which one to

use. Click OK.

7. A COM1 Properties dialog box should appear. Use the

pull-down menus or type in the following for each

selection (see ILLUSTRATION 9):

Bits per second: 9600 (or 19200 if thermostats

are configured for this baud rate)

Data bits: 8

Parity: None

Stop bits: 1

Flow control: none

Click OK.

ILLUSTRATION 8 – Select Com Port

ILLUSTRATION 9 – Connection Properties

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Echo 8870 Manual do Utilizador Página 16